With the same power crusher, the structure of different models of raw materials is completely different, and the wrong selection is easy to block the machine, break the knife and consume high power.
Materials
1. Hard rubber (ABS, PC, head material, injection molding corner) → General heavy crusher.
Thick cutter head, short and thick claw cutter and thick screen, the rotor is heavy and impact-resistant, suitable for hard and brittle plastics, and the feed inlet is small and anti-bouncing.
2. Film/woven bag/agricultural film LDPE→ special crusher for soft materials
Spiral feeding+curved knife structure, sharp knife shape and large inclination angle, widened feeding hopper, matched with strong wind to send out the material, to avoid the film winding shaft blocking the rotor and the large screen hole.
3.PET mineral water bottles, daily chemical bottles → special crusher for plastic bottles
The feeding hopper is raised, the material is forced to be allocated by thickening, the cutter bodies are arranged in a staggered way, and the hollow bottles are squeezed and broken, and the cleaning interface is reserved by conventional configuration.
