That’s all about the knowledge of plastic crusher. If there are any questions in the future, I will continue to answer them. Next, I will turn my attention to our metal crusher again. Today, I will focus on the causes of the crusher’s deceleration and sudden stop and the corresponding solutions.
I. Cause of failure
1.Excessive feeding or material mixed with foreign matter leads to material jamming and equipment load exceeding the standard.
2.The drive belt is loose and aging, and the power transmission is insufficient.
3.Circuit and motor failure, unstable power supply.
4.The tool body and bearing are seriously worn, and the running resistance increases.
II. Solutions
1. Stop feeding, clean up the jammed materials and sundries in the machine, and standardize the feeding amount.
2. Adjust the belt tightness and replace the aged belt in time.
3. overhaul the circuit and motor to ensure normal power supply.
4. Lubricate the bearing regularly and replace the worn tool body parts.
Adhere to the normal inspection and equipment maintenance, so as to reduce the occurrence of failures.
