Today, I’m going to tell you the last influencing factor. These three factors are the main reasons why the crusher can’t start normally. I hope you will bear in mind. After that, I will also tell you some daily prevention methods.
Lubrication and load problems
1.The bearing is short of oil and locked.
Fault manifestations: great starting resistance, accompanied by harsh noise.
Solution: Fill the bearings and rotating parts of the equipment with special grease regularly, and disassemble and replace the bearings if they are severely stuck.
2. Overload forced start
Fault manifestations: tripping and stopping as soon as it is started.
Solution: It is forbidden to start with full load to ensure the equipment to start with no load; Reduce the single feeding amount and avoid large and hard materials directly entering the machine.
