When the raw materials with high impurity content (such as household materials, unified materials, etc.) enter the crusher, long-term use will lead to excessive accumulation of impurities in the crushing cavity. This will not only affect the quality of finished products, but also easily lead to the blockage of the discharge port, which will have a negative impact on the operation of the equipment. In this case, we can solve it from the following aspects:
First of all, the pretreatment link is added before the raw materials enter the crusher, and the raw materials are screened and removed by vibrating screen, magnetic separator and other equipment to reduce the impurity content entering the crusher.
Secondly, according to the material characteristics, the crushing parameters of the crusher are properly adjusted, such as reducing the feeding speed and adjusting the crushing wall, so that the equipment can better meet the crushing needs of complex materials.
Finally, strengthen the daily maintenance of the crusher, regularly check and clean the crushing cavity, screen and other parts, at the same time pay attention to the wear and tear of the parts, and replace the damaged parts in time to ensure that the equipment is always in good running condition.
The above are the solutions to the blockage of the crusher outlet caused by excessive impurity content in raw materials. If you encounter similar problems, you may wish to try these methods.
