From the scope of shredding, it can be divided into wood shredders, plastic shredders, rubber tire shredders, metal shredders and so on. Today we will introduce the performance of the metal shredder.
Metal shredders are mainly used for TV sets, circuit boards, washing machines, refrigerator housings, car racks, motorcycle racks, bumpers, lightweight materials, metal pipe fittings, car housings, aluminum alloys, engine housings and other plates with a thickness of less than 5 mm.
Its working principle is that the material enters the shredding box through the feeding system, the box is loaded with shredding blades, and the pusher pushes the material to the vicinity of the blades, and the material is shredded into small pieces through the comprehensive actions of tearing, squeezing and shearing of the shredding blades, and then discharged from the discharge port.
The cause of material block
when the material is put, it is fed by conveyor belt, forklift and traveling crane, and the feeding speed is very fast. Although the feed inlet of metal shredder is generally larger than that of plastic shredder, too fast feeding will also cause material jam or blockage.
How to solve the material block
1.once the material blockage occurs, the equipment should be turned off immediately and the power supply should be cut off before treatment.
2.Another thing is to check whether the lubricating oil at each bearing position of the equipment is filled up, and ensure that all links of the equipment are smooth during operation.
3.And in the process of using the equipment, it is forbidden to put too much material at one time to cause jamming, and it is forbidden to throw inflammable, explosive and hard things into the equipment for shredding.
4. It is forbidden to stand in front of the feed inlet. If the equipment is overloaded, it is necessary to slow down the feeding speed in time to prevent the motor from being damaged during the operation.
5.In addition, we use PLC control cabinet, which has the function of preventing overload and automatic reversal to protect the equipment during shredding.
Epilogue
Choosing the right shredder has been more than half successful, so I hope everyone can find the most suitable shredder.
