1. Fill the bearing position with butter in time. Turn on the equipment every once in a while and clean up the grease in the bearing position in time. If not cleaned, the bearing may get stuck, which may lead to bearing damage. Whether you use my equipment or someone else’s equipment, you must pay attention to the temperature of the bearing.
2. Every time a production cycle is completed, it is necessary to check whether the screws on the equipment are loose, whether the conveyor is running off, and the wear condition of wearing parts. If there is a problem, it needs to be repaired in time. In addition, the dust on the motor should also be cleaned up in time, because these dust will affect the heat dissipation of the motor and may cause damage to the motor.
3. Clean the dust collector in time. Every time a shift is completed, the dust collector will collect a certain amount of dust and rust. If it is not cleaned in time, it may lead to dust explosion and cause safety hazards.
Generally speaking, if you want to keep the crusher in good working condition, you need to check whether the screws are loose and the bearing position is short of oil before starting, and check the wear of wearing parts after shutting down, and maintain the equipment in time.
