Today, I will share with you the treatment method when the bearing cracks. When cracks appear in bearings, they are usually accompanied by partial notches.
Reasons and Solutions
First of all, the most common reasons are excessive impact load or poor lubrication. At this time, check the lubrication and the service conditions of the bearing.
Secondly, the interference is too large, which will lead to the reduction of spacing and aggravate friction heating. The corresponding solution is to set an appropriate amount of interference, and it is recommended to use a feeder for feeding.
Then the bearing peeled off.If there is a large peeling of the bearing and it is not checked and adjusted in time, it may aggravate the occurrence of cracks and defects. At this time, the installation and use methods need to be improved.
Finally, there are problems such as poor accuracy of bearing installation side, too large corner circle and improper use, including foreign matter jamming.
Conclusion
In view of these situations, we should carefully check the design around the bearing. In the daily maintenance, once the bearing is found to have problems, measures should be taken immediately to prevent the bearing from further damage, so as not to delay production.
