Tire shredder spindle is one of the most important structures on the tire shredder. Therefore, attention should be paid to its correction. If the spindle is bent, there will be serious consequences. Below, we will also introduce how to correct the spindle of the tire shredder.
Influence of spindle bending
1. Affect the service life of the spindle.
2. The blade produces interference cutting, which reduces the service life of the blade.
3. Affect the size of processed materials
4. Reduce the service life of bearings.
5. It is not easy to assemble;
6. If the reducer is directly connected, the service life of the reducer will be reduced; Adopt belt drive, easy to jump, reduce the service life of V-belt.
Therefore, the spindle accuracy should be strictly required to ensure the service life of the equipment, increase the yield and meet customer requirements.
The correction steps of the tire shredder are as follows:
1. Use a press to correct the fourth paragraph.
2. Clamp the fifth segment with a four-jaw chuck, support the third segment with a center frame support structure, and align the center of the fourth segment. Punch the center hole, then hold it with the thimble, remove the center frame, finish turning the front section, third section and rough turning the vacant part. 3. Spindle head changing processing. Clamp the front section with a four-jaw chuck, support the fifth section with a center frame support structure, and align the center of the fourth section. Punch the center hole, then hold it with thimble, remove the center frame, finish turning the fifth section and rough turning the vacant part.
