In the production process, the crusher occasionally stops suddenly. At this time, it can only stop working and wait for the professional master to come to repair, which greatly affects the production progress. So, how can we try to avoid this situation? Because the situation of each production site is different, here are some situations for everyone, and you can judge for themselves according to the actual situation.
Reasons
1. The oil temperature is too high. The oil quantity is interlocked with the main engine. If the oil temperature remains high, after a period of time, the oil quantity system will send a signal to the main engine to directly cut off the power supply of the main engine.
2. The gas station is suddenly damaged. If there is no lubricating oil, the crusher will automatically cut off the power supply.
3. The discharge port of the crusher is blocked, which causes the material to wrap the rotor in a large area, which makes the whole equipment into a locked state, and then causes the equipment to stop.
4. The bearing is short of oil, or powder enters the bearing, and the dust and oil are mixed together, resulting in the bearing being unable to rotate, which will lead to the phenomenon of jamming and locking.
5. The bearing barrel is damaged. Bearing overload operation for a long time will increase the transmission power of V-belt, which will also lead to equipment shutdown.
Solution
1. Add lubricating oil to the bearing regularly.
2. Regularly clean the foreign bodies and impurities in the bearing cavity, such as grease, so as to enlarge the clearance of the bearing and ensure the flexible operation of the bearing.
3. In the process of crushing production, we should also form the good habit of timely repairing and maintaining the equipment, and pay attention to whether there is oil leakage to ensure the efficient work of the crusher.
