Today, let’s talk about how to deal with the excessive vibration of the main body of the equipment. There are actually many reasons for the violent vibration of the crusher, so I will explain it in detail today.
Reasons
First of all, the feed particle size is too large, or foreign matter enters. The treatment method of this situation is very simple. As long as the materials are strictly screened and the average particle size of the feed is controlled, the problem can be avoided.
Secondly, the problem of unstable material layer. In this case, it is necessary to check whether the material quantity is stable. It is suggested to use a conveyor to feed evenly, or adjust the height of the measuring ring to make the material form a stable material layer.
In addition, the contact between the hammer head and the liner plate leads to severe vibration. At this time, the limit device should be adjusted to ensure that a proper gap is maintained between the hammer head and the liner plate.
Finally, if it has been confirmed that the incoming particle size is uniform and the material layer is stable, then the problem of discharging should be considered. At this time, it is necessary to check the discharge position to see if the dust collector is blocked. Once the blockage is found, it should be dredged in time.
These are the main reasons for the violent vibration of the equipment. If you have any other questions, please contact me.
